Коммутатор Cisco Catalyst WS-C3560G-48PS-E

Производитель: Cisco

Артикул: WS-C3560G-48PS-E

Срок поставки: по запросу

Цена по запросу

Уточните условия поставки у менеджера.

Описание

Catalyst 3560 на 48 портов Ethernet 10/100/1000 с поддержкой питания устройств по витой паре (PoE) и 4 порта SFP. Версия ПО IPS Image.

DescriptionSpecification
PerformanceForwarding bandwidth32 Gbps
DRAM128 MB
FLASH32 MB
Forwarding rate:38.7 Mpps
• Configurable up to 12,000 MAC addresses• Configurable up to 11,000 unicast routes• Configurable up to 1000 IGMP groups and multicast routes
Connectors and Cabling
  • 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
  • 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive)
  • 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling
  • 100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1,2 (negative) and 3,6 (positive)
  • 1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling
  • 1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling
  • 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single/multimodefiber)
  • Cisco Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cm
Power Connectors
  • Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 2300. The connectors are located at the back of the switch.
  • Internal-Power-Supply Connector
  • The internal power supply is an autoranging unit.
  • The internal power supply supports input voltages between 100 and 240 VAC.
  • Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
  • Cisco RPS Connector
  • The connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.
  • The connector supports up to six external network devices and provides power totwo failed devices at a time.
  • The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic.
  • Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-supply receptacle.
Indicators
  • Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE applied, PoE error, and PoE disabled indications
  • System-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications
Dimensions
(H x W x D) (cm)
4.4 x 44.5 x 40.9 cm
Weight (kg)7.0 kg
Environmental RangesOperating temperature0 to 45?C
Storage temperature-25 to 70?C
Operating altitudeUp to 3,049 m
Storage altitudeUp to 4,573 m
Operating relative humidity10 to 85% noncondensing
Acoustic NoiseISO 7779: Bystander positions operating to an ambient temperature of 25°C
52-58 dBa
Mean Time Between Failure (MTBF)WS-C3560G-48PS-E147,000 hours
ПроизводительCisco

Характеристики

128 MB
FLASH
32 Gbps
DRAM
32 MB
-
4.4 x 44.5 x 40.9 cm
Weight (kg)
52-58 dBa
Mean Time Between Failure (MTBF)
7.0 kg
Environmental Ranges
Acoustic noise
ISO 7779: Bystander positions operating to an ambient temperature of 25°C
Description
Specification
Forwarding rate
38.7 Mpps
Operating altitude
Up to 3,049 m
Operating relative humidity
10 to 85% noncondensing
Operating temperature
0 to 45?C
Performance
Forwarding bandwidth
Storage altitude
Up to 4,573 m
Storage temperature
-25 to 70?C
WS-C3560G-48PS-E
147,000 hours
Производитель
Cisco
• 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling• 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive)• 100BASE-TX ports: RJ-
Power Connectors
• Configurable up to 12,000 MAC addresses• Configurable up to 11,000 unicast routes• Configurable up to 1000 IGMP groups and multicast routes
Connectors and Cabling
• Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 2300. The connectors are located at the back of the switch.• Internal-Power-Supply Connector• The internal power supply is an autoranging unit.• Th
Indicators
• Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE applied, PoE error, and PoE disabled indications• System-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications
Dimensions (H x W x D) (cm)

Спецификации

Подробную спецификацию предоставим по запросу. Укажите необходимые интерфейсы, производительность и условия эксплуатации.

Загрузки

Документы для скачивания пока не добавлены. Запросите инструкцию или технический паспорт у менеджера.

Отзывы (0)

Отзывов об этом товаре пока нет.

Поделитесь опытом использования

Отзыв появится после проверки. Email нужен для связи с вами и не публикуется.

Как уточнить цену и заказать

Как получить актуальную цену?

Нажмите «Запросить КП» в карточке товара, укажите количество и контактные данные. Название и артикул товара попадут в заявку автоматически. Актуальную стоимость и условия поставки менеджер укажет в коммерческом предложении. Цены на сайте носят информационный характер и не являются публичной офертой.

Как узнать наличие, комплектацию и срок поставки?

Укажите нужную модель, количество и город доставки в комментарии к запросу КП. Менеджер уточнит наличие, комплектацию и условия поставки для вашего запроса.

Можно ли подобрать оборудование под задачу?

Опишите конфигурацию сети, требуемую производительность и интерфейсы в форме запроса. Поможем сравнить модели и подобрать совместимые аксессуары. Контакты отдела продаж · Доставка и оплата.

Коммерческое предложение

Запросить КП

Информация для покупателей

Об актуальности цен

Цены на сайте носят информационный характер и не являются публичной офертой. Актуальная стоимость и условия поставки будут указаны в коммерческом предложении после отправки запроса.